Product Description
Baldwin BW5138- Spin-on Coolant Filters with BTE Formula
General Description:
The objectives of diesel engine coolant filters, also known as water filters, are to remove contaminants from the engine cooling system and add chemicals to the coolant itself to replenish important protectants that may be lost over time. Baldwin Filters’ coolant spin-on filters with Balanced Treatment for Ethylene Glycol (BTE) formula are designed to protect the engine and enhance its performance. BTE formula coolants offer a combination of low-silicate antifreeze and water, which removes heat and lubricates the water pump. They provide freeze protection and prevent scale-sludge formation.
Key Features
- Advanced BTE formula for enhanced coolant protection
- Easy spin-on design for quick installation
- High filtration efficiency for debris capture
- Durable construction for high-pressure conditions
- Extends coolant system life and improves engine performance
Specifications
| Specification | Details |
|---|---|
| Brand | Baldwin |
| Product Type | Coolant Spin-on with BTE Formula |
| Thread Size | 11/16-16 |
| Weight (LBS) | 1.15 |
| Packing Dimensions (Inches) | |
| Length | 3.7 |
| Height | 3.7 |
| Width | 5.1 |
Instructions
- Remove the old filter and clean the mounting surface.
- Apply a small amount of coolant to the gasket of the new filter.
- Screw the new filter onto the mounting base by hand.
- Tighten the filter with an oil filter wrench if necessary.
- Check for leaks and ensure the filter is properly secured.
Warning Description
- This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
